Company Profile
GSE

Shandong Yangxin Genshen Electric Co., Ltd.

GSE since 2016
Year of Establishment 2012-05-14
Business Type Manufacturer/Factory & Trading Company
Registered Capital 7.39 Million USD
Main Products Distribution Transformer, Transformer, Distribution Box, Substation, Meter Box, Power Transformer
Main Markets Domestic
Annual Output Value US$10 Million - US$50 Million
Number of Employees 58
Management System Certification ISO9001:2008, ISO14001:2004, OHSAS18001:2007
No. of Production Lines 4
No. of R&D Staff 11-20 People
No. of QC Staff 11-20 People

Research & Development Capacity

Shandong Yangxin Genshen Electric Co., Ltd (GSE) was founded in 2012 and her subsidiary,Qingdao Yaoutongxing International Trading Co.Ltd, is founded in Qingdao. registered capital of 50 million yuan, covers an area of 50 acres, production workshop 15000 square meters, 200 employees, annual sales reached about 80000000 yuan is a high-tech enterprise integrated R&D, production, sales.

GSE is one of the strongest influence and expertise enterprises in North China, with ISO9001 quality management system, OHSAS18001 occupation health and safety management system and ISO14001 environmental management system certification, 3C certification.

GSE have 30 Electric engineers could supply professional solutions for customers′ requirment.

Company Description

Shandong Province Yangxin Genshen Electric Co., Ltd was founded in 2012 and her subsidiary, Qingdao Yaoutongxing International Trading Co. Ltd, is founded in Qingdao. Registered capital of 50 million yuan, covers an area of 50 acres, production workshop 15000 square meters, 150 employees, annual sales reached about 80000000 yuan is a high-tech enterprise integrating a production, sales and system, company to the electric meter box, cable casing, high and low voltage electrical switchgear, transformer, box type substation, cable branch box, distribution box, ring network cabinet, JP cabinet, power distribution box, low voltage reactive power compensation control cabinet, electric energy metering box, high voltage metering device, porcelain insulator, composite insulator, transformer oil, electrical equipment, instrumentation, and insulated wire wire and cable, communication cable, cable accessories, monitoring equipment, electrical fittings and electrical equipment processing, glass steel material with sheath (SMC), PC+ABS material metering box system Products, electric vehicle charging equipment, photovoltaic power generation equipment (excluding generators), wind power equipment production and sales is one of the strongest influence and expertise in North China enterprises, is the ISO9001 quality management system, OHSAS18001 occupation health and safety management system and ISO14001 environmental management system certification, 3C certification enterprises.

The company is located 14 kilometers west of Yangxin County, the provincial highway and the intersection of the 317 provincial highway in the north, from the Binzhou-Dezhou freeway 3 km, strategic location, convenient transportation, and the transportation is convenient, and the transportation is convenient. Company covers an area of 26934.7 square meters, production workshop covers an area of 50 million square meters, office area of 2000 square meters, . With advanced production lines, testing equipment, thereby ensuring the quality of products, the formation of the development, testing to mass production of modern industrial production scale.

The company spirit of "technology and development, quality of survival" principle, adhere to the "customer first, quality first" purpose; Follow the "from the society and serving the society" the principle of "service above all, responsibility weightier than Mount Tai" for the purpose. We are committed to the prosperity and development of electric power and security. We sincerely welcome customers both at home and abroad to come and visit us.

Distributorship Description

Basic Information

Countries Needed Brazil, Chile, Malaysia, Russia, India
Cooperators Needed power transformer, distribution box, substation, meter box companies
Cooperation Type General Agent, Exclusive Agent, Non-Exclusive Agent, Distributor
Trade Terms FOB, CIF, CFR
Payment Terms LC, T/T, D/P, PayPal, Western Union, Small-amount payment

Supporting Services

Training Support If Agent need, we could supply Professional Training
After-sale Service 100% excallent quality unit, could supply some spare parts even they don′t have chance to be used.
Commission & Profits According to international practice
Products Specification
  • S13-Mr-L 30-2500 kVA Three-Phase Oil-Immersed Fully-Sealed Power/Distribution Transformer
    S13-Mr-L 30-2500 kVA Three-Phase Oil-Immersed Fully-Sealed Power/Distribution Transformer
  • 10kv Oil-Immersed Laminated Core Type Fully-Sealed Energy Saving Power Distribution Transformer
    10kv Oil-Immersed Laminated Core Type Fully-Sealed Energy Saving Power Distribution Transformer
  • Stainless Steel Dfw Series Power Cable Box Distribution Box and Cabinet
    Stainless Steel Dfw Series Power Cable Box Distribution Box and Cabinet
  • PC -801z Single Phase Eight Meter Box (with main control box)
    PC -801z Single Phase Eight Meter Box (with main control box)
Product Certifications / Testing Reports CCC

Product Description

S13-MR-L 30-2500 KVA Three-Phase Oil-Immersed Fully-Sealed Power/Distribution Transformer

S13-Mr-L 30-2500 kVA Three-Phase Oil-Immersed Fully-Sealed Power/Distribution Transformer
The partner of State Grid Corporation
The partner of National Railway Administration of China
ISO9001, TUV, and CE standard 
1.General Characteristics
The transformers electrical design results mainly from:
• Power rating,
• Primary and secondary voltage levels,
• Ambient temperature and temperature rise,
• Altitude of installation,
• Short-circuit impedance,
• Vector group,
• No load losses,
• Load losses,
• Frequency,
• Permissible tolerances,
• Other particular conditions.
KVAVoltageVECTOR GROUPLOSSESNo-Load CurrentWeight(kg)Overall dimension (mm)
H.V(KV)L.V(KV)No-Load LossLoad Loss Oil WeightTotal WeightLWH
20 
 
 
 
 
 
 
 
 
6
6.3
10
10.5
11
13.2
 
 
 
 
 
 
 
 
 
 
380
400
415
433
 
 
 
 
 
 
 
 
 
 
 
YynO Dyn11 Yzn11
905302.355230720440855
301006002.175305750500990
501308702.0804058004801030
6315010401.9954558306151060
8018012501.91055108405801115
10020015001.81205308906451145
12524018001.71306709106001185
16028022001.61408109107001280
20034026001.516089010007601240
25040030501.4175102012857301290
31548036501.4185117012807401385
40057043001.3215141013107501432
50068051001.2260164513657651510
63081062001.1310207014858151615
80098075001.0370244516409301590
10001150103001.04252800186011201630
12501360120000.94803320186011201830
16001640145000.85504175197511751900


S13-Mr-L 30-2500 kVA Three-Phase Oil-Immersed Fully-Sealed Power/Distribution Transformer

2.Standards
Many electrical international committees have defined standards for electrical equipment, including transformers.
The IEC, BS, NF and DIN standards are the most applied standards for transformers and for some of their parts.
In every country, the local electric authorities have adopted one of these standards or created one that suits the needs, laws and regulations of their country.

3.Application
Distribution transformers are the end equipment before electricity reaches the consumer. They provide low voltage by transforming the network medium voltage.
In most cases, transformers are designed as liquid filled particularly as oil immersed type.
These transformers have usually a power ranging from 50 to 2500kVA, with a maximum operating voltage of 36kV.

4.Mechanical Features
4.1Hermetically sealed or breathing tank
For Distribution Transformers, the default construction is the hermetically sealed non-rigid tank completely filled. Air cushion in used with rigid tanks. The variation of oil volume, due to its temperature variation, is absorbed in the flexible fins of the corrugated panels, and in the air cushion when applicable.
Breathing tank with conservator is also a possible configuration.
4.2. Tank types
The transformer tank is usually of a non rigid structure with corrugated panels, designed to withstand the mechanical stresses, absorb the oil expansion, and meet the thermal evacuation constraints.
For power rating above 3150kVA, the tank is usually designed with rigid structure, cooling radiators and conservator.
4.3. Cover
For distribution transformers, covers are made of steel plates with bended edges, thus improving the esthetical aspect and reinforcing the cover which is especially important when untanking the unit.
Accessories are mounted on the cover through adequate connectors. Multifunction holes can be provided to receive different type of accessories.
For example, on the same hole, alternatively a DMCR or a pressure relief valve or a thermometer can be mounted.
4.3. Magnetic circuit
The magnetic circuit is of the three legs construction, Step lap.or GT.
It is made out of a cold rolled, grain oriented silicon steel strips, each strip (0.23, 0.27or 0.30mm thick) being insulated from both sides by Carlite.
4.5. Winding coils
Both the primary and secondary windings are made of copper or aluminum.
The primary voltage is directly wound on the secondary voltage winding, with insulating barriers and cooling channels between the two windings.
Secondary voltage coils are of rectangular wires or foil conductors. Primary voltage coils are of round enamelled wires, or rectangular paper insulated wires for high power ratings, or round paper insulated wires.
Adequate channels for oil circulation are integrated in the windings to provide an efficient cooling and limit the hot spot temperature.
4.6.Cooling liquid
By default, transformer oil according to IEC 60296-03 specifications is used as cooling medium. Other fire resistant insulating liquids with fire points above 300ºC are also available on special request.
For distribution transformers, the primary filling is done under vacuum in order to assure the high penetration of oil. Final filling is made to adjust the appropriate oil level on delivery.
4.7.Tests
Typical test values and performances are performed in the painting lab on steel plates during the whole painting process in order to confirm the following:
• Minimum paint thickness film (ISO 2808): 70µm
• Specular gloss factor at 60 Deg (ISO 2813): 90 +/- 5%
• Falling weight test (ISO 6272): 1Kg/050cm
• Erichsen cupping test (ISO 1520): 08mm
• Scratch test (Adhesion ISO 2409): 0
• Bend Test (cylindrical mandrel ISO 1519): 3,0mm
• Salt spray (Fog) test (ISO 7253): Over 1000 Hours

S13-Mr-L 30-2500 kVA Three-Phase Oil-Immersed Fully-Sealed Power/Distribution Transformer



5.Company Introduction
Shandong Yangxin Genshen Electric Co., Ltd (GSE) was founded in 2012 and her subsidiary,Qingdao Yaoutongxing International Trading Co.Ltd, is founded in Qingdao. registered capital of 8000,000.00 USD, covers an area of 50 acres, production workshop 15000 square meters, 150 employees, annual sales reached about 12,000,000.00 USD is a high-tech enterprise integrated R&D, production, sales.

S13-Mr-L 30-2500 kVA Three-Phase Oil-Immersed Fully-Sealed Power/Distribution Transformer
GSE main products:
1)Transformer
2) Electric Meter Box,
3) Distribution Box,
4)Box Type Substation
5)Switchgear
6)JP Integrated Power Distribution Cabinet


S13-Mr-L 30-2500 kVA Three-Phase Oil-Immersed Fully-Sealed Power/Distribution Transformer




GSE have advanced production lines, testing equipments, ensuring the products with excellent quality. " Survive on high quality and seek development with prestige " is GSE principle, "customer first, quality first" is GSE purpose; "service above all, responsibility above all". We are committed to the prosperity and development of electric power and security. We sincerely welcome both domestic and overseas customers to come and visit us. 

6.FAQ
Q: Are you manufacturer?
A: Yes, we are manufacturer. Our factory is in Binzhou City, Shandong Province.
Q: Can I get guarantee of products?
A: Yes, every product is 1 year quality warrantee under customer correct using the products.
Q: Do you have any Certificate?
A: Yes. Each of our unit has ISO,TUV,CCC,CE certificate. All the electric parts with CE certificate, If you need any other Certificate, we can help you to get it.
Q: How to buy it? What about the delivery?
A: Please contact me by email or online, let me know your situation, I will give you professional solution.We have shipping agent can choosing the cheapest and fastest delivery. FOB,CIF, C&F or EXW are no problem for us.
Q: How can I pay you?
A: T/T, L/C is very well used.
Q: What about the EXW delivery time?
A: 4~6weeks.
Q: Could you offer some spare parts for free?
A: Yes, no problem.
Q: What about the maintenance?
A: All the goods past the test, maintenance is very easy.
 
 
S13-Mr-L 30-2500 kVA Three-Phase Oil-Immersed Fully-Sealed Power/Distribution Transformer


7. Why choose our Products?
7.1.Service
After customer's advance payment, GSE will update per week. Keep customers very clear the progress of their orders.
After delivery the goods to the port, we will send B/L,C/O Insurance orign document to customer by Express within 5days.
7.2.Price
GSE will provide competitive price to help Agency and Customers to win the tenders and handsome profit. If you have target price, just tell us!
7.3.Quality
GSE, As a stable supplier for STATE GIRD for years, Our unit have already mounted in all over the china. All the parts are famous brand with high quality, to ensure our unit with excellent quality and long term service life.
7.4.After sale 
We will provide new electrical accessories or parts in warranty during time for free.(one year warranty period)
 
 
If you are interested in our product, please don't hesitate to contact with us.
Contact Info:
Alvin
Sales & Marketing Manager
Tel:+86-13011735592
Shandong Yangxin Genshen Electric Co.,Ltd
www.sdgenshen.com

 
Product Certifications / Testing Reports CCC

Product Description

 10kv Oil-Immersed Laminated Core Type Fully-Sealed Energy Saving Power Distribution Transformer

10kv Oil-Immersed Laminated Core Type Fully-Sealed Energy Saving Power Distribution Transformer
The partner of State Grid Corporation

The partner of National Railway Administration of China
ISO9001, TUV, and CE standard 
1.General Characteristics
The transformers electrical design results mainly from:
• Power rating,
• Primary and secondary voltage levels,
• Ambient temperature and temperature rise,
• Altitude of installation,
• Short-circuit impedance,
• Vector group,
• No load losses,
• Load losses,
• Frequency,
• Permissible tolerances,
• Other particular conditions.

2.Oil-immersed and three-phase distribution transformers 
2.1.Standard: IEC
2.2.Rated power:50-2500 kVA
2.3.Rated frequency: 50 Hz
2.4.HV rating: up to 36 kV
2.5.Taps on:2.5 % or 2 x 2.5 %
2.6.HV side:As request
2.7.LV rating: 400-720 V(special designs for up to 12 kV can be built)
2.8.Connection: HV winding: delta
                       LV winding: star(up to 100 kVA: zigzag)
2.9.Cooling:ONAN
2.10. Protection class: IP00
2.11.Final coating:RAL 7033 (other colours are available)
 

10kv Oil-Immersed Laminated Core Type Fully-Sealed Energy Saving Power Distribution Transformer
3.Application
Distribution transformers are the end equipment before electricity reaches the consumer. They provide low voltage by transforming the network medium voltage.
In most cases, transformers are designed as liquid filled particularly as oil immersed type.
These transformers have usually a power ranging from 50 to 2500kVA, with a maximum operating voltage of 36kV.
4.Mechanical Features

4.1.Core
The magnetic circuit is of the three column type with mitred joints. It is manufactured with first-rate, grain oriented silicon iron sheets insulated with carlite. The mounted core is clamped down in order to reduce vibrations and minimise noise levels.
4.2.Windings
The windings are made of either copper or aluminium; they are insulated with either pure cellulose or double enamel. Furthermore, the complete columns are manufactured to withstand short circuit stresses.
4.3.Off-circuit tap changer
The tappings (±2 x 2.5%) of the HV winding, are connected to the off-circuit tap changer located horizontally between the yoke and the tank cover. The handle is located on the cover and should be operated when the transformer is deactivated. The design prevents setting the off-circuit tap changer to intermediate positions. The mechanism can also be padlocked during normal transformer operation.
4.4.Insulating oil
The mineral oil with its electrical and chemical characteristics is in compliance with the IEC Standards and is P.C.B. and P.C.T. free.
4.5.Tank and cover
The sides of the tank are made of corrugated cooling surfaces. The bottom plate, side and frames are of a welded construction. The welds are tested for oil tightness. The thermometer pockets, bushings, tap switch drive and lifting lugs are fitted on the tank cover. The cover is bolted to the tank frame. The undercarriage is welded to the bottom plate and the rollers are suitable for either longitudinal or transverse movements.
4.6.Painting and surface treatment
Transformers are either hot-dip galvanized or painted. The metal parts are carefully sandblasted. The painting system is a single coat one pack epoxy. The top coat is RAL 7033 or customized. The hot-dip galvanizing is 70 µm minimum.
4.7.Options and accessories
- Plug-in bushings on HV
- Max thermometer
- Dial type thermometer with two contacts
- Oil level indicator for hermetically sealed transformers
- Off-circuit tap changer with 3 or 7 positions
- Sparking gaps
- Pressure relief device
- Cable boxes
- Integrated pole brackets on tank
- Skid base
- Bi-directional rollers
- Total enclosure on cover over HV and LV Bushing
4.8.Testing
The transformers are manufactured in accordance with ISO 9001 and ISO 14001. At the end of the manufacturing process the transformers are individually tested in accordance with the IEC Standards.
4.9.The routine tests are:
- Measurement of the winding resistance
- Measurement of the voltage ratio and check of the vector group
- Measurement of the impedance voltage and measurement of load losses
- Measurement of no load losses and no load current
- Dielectric tests
Upon request, witnessed type/special tests can be carried out. 

5.Company Introduction
Shandong Yangxin Genshen Electric Co., Ltd (GSE) was founded in 2012 and her subsidiary,Qingdao Yaoutongxing International Trading Co.Ltd, is founded in Qingdao. registered capital of 50 million yuan, covers an area of 50 acres, production workshop 15000 square meters, 150 employees, annual sales reached about 80000000 yuan is a high-tech enterprise integrated R&D, production, sales.


10kv Oil-Immersed Laminated Core Type Fully-Sealed Energy Saving Power Distribution Transformer
GSE have advanced production lines, testing equipments, ensuring the products with excellent quality. " Survive on high quality and seek development with prestige " is GSE principle, "customer first, quality first" is GSE purpose; "service above all, responsibility above all". We are committed to the prosperity and development of electric power and security. We sincerely welcome both domestic and overseas customers to come and visit us.

 

10kv Oil-Immersed Laminated Core Type Fully-Sealed Energy Saving Power Distribution Transformer

6.Certificate
GSE is one of the strongest influence and expertise enterprises in North China, with ISO9001 quality management system, OHSAS18001 occupation health and safety management system and ISO14001 environmental management system certification, 3C certification.

10kv Oil-Immersed Laminated Core Type Fully-Sealed Energy Saving Power Distribution Transformer

7.GSE Main Product
GSE main products: electric meter box, cable casing, high and low voltage electrical switchgear, transformer, box type substation, cable branch box, distribution box, ring network cabinet, JP cabinet, power distribution box, low voltage reactive power compensation control cabinet, electric energy metering box, high voltage metering device, porcelain insulator, composite insulator, transformer oil, electrical equipment, instrumentation, and insulated wire wire and cable, communication cable, cable accessories, monitoring equipment, electrical fittings and electrical equipment processing, Glass fiber reinforced plastics material with sheath (SMC), PC+ABS material metering box system Products, electric vehicle charging equipment, photovoltaic power generation equipment (excluding generators), wind power equipment production and sales.

8.QA
8.1.Q: Are you manufacturer?
    A: Yes, we are manufacturer. Our factory is in Binzhou City, Shandong  Province.
 8.2.Q: Can I get guarantee of products?
    A: Yes, every product is 1 year quality warrantee under customer correct using the products.
 8.3.Q: Do you have any Certificate?
    A: Yes. Each of our unit has CCC certificate. All the electric parts with CE certificate, If you need any other Certificate, we can help you to get it.
 8.4.Q: How to buy it? What about the delivery?
    A: Please contact me by email or online, let me know your situation, I will give you professional solution.We have shipping agent can choosing the cheapest and fastest delivery. FOB,CIF, C&F or EXW are no problem for us.
 8.5.Q: How can I pay you?
    A: T/T, L/C is very well used.
 8.6.Q: What about the production?
    A: Produce time is 4~6weeks.
 8.7.Q: Could you offer some spare parts?
    A: Yes, no problem.
 8.8.Q: What about the maintenance?
    A: All the goods past the test, maintenance is very easy.7
9.Contact
Should you have any problem,please contact with us,we will reply to you in 24 hour.
Manager:Alvin
Mobile:+86 177 6202 7849
 
 
 
Product Certifications / Testing Reports CCC

Product Description

Product overview

Cable connector with DFW series cable distribution box conforms to the IEEE386 standard. All cable connections are suitable for XLPE insulated cables. The cable section of the 200A cable joint is 35mm2-18mm2 cable; the cable joint of 600A is suitable for the cable with cable section of 25mm2-500mm2.
 
rated voltage12KV
rated current630A
dynamic current50KA/0.3S
thermal current20KA/3S
power frequency voltage in 1 minute42KV
direct voltage in 15 minute52KV
lightning impacting voltage105KV
protection grade of the cabinetIP33
  
the maximum system voltage(Um)24KV
impacting voltage125KV
AC voltage(5 minute)54KV
continuous rated current250A
overload current(maximum 8 hours)300A
short-circuit current(1 second)12.5KA
 

DFW cable branch box (American) series

American cable branch box produced by our company, with its excellent performance, standardized design, beautiful appearance, cable engineering equipment widely used in cable system in the distribution network, in major industrial parks, residential areas, the densely populated city, commercial center and high-rise buildings and other places widely accepted to open the door, it one-way and transverse through bus as the main feature, with small width, flexible combination, insulation, sealing and other significant advantages, in accordance with the rated current can generally be divided into 600A main circuit and 200A circuit is two 600A, the main circuit uses the screw bolt connection, 200A branch circuit adopts pull type connection and can load plug.

Factory Show

It is one of the most professional and famous expertise in North China. With major business of power distribution equipment, power transformer euipment, box-type substation, electricity measuring and high-voltage metering device, as well as the power device, instruments&meters, measuring box with GRP and PC+ABS material, charging equipment for electric car, photovoltaic power generation(without generator set) and wind power generation equipment both in producing and selling. For a 3C authentication factory by nationality and already got the ISO9001 quality management system, OHSAS18001 occupation health and safety management system and ISO14001 environment certification.  

Stainless Steel Dfw Series Power Cable Box Distribution Box and Cabinet

 Stainless Steel Dfw Series Power Cable Box Distribution Box and Cabinet
Stainless Steel Dfw Series Power Cable Box Distribution Box and Cabinet
Stainless Steel Dfw Series Power Cable Box Distribution Box and Cabinet
Stainless Steel Dfw Series Power Cable Box Distribution Box and Cabinet
Stainless Steel Dfw Series Power Cable Box Distribution Box and Cabinet

Advantages
1, The most favorable offer from professional factory with assurance quality for you!
2, Cooperate with the State Grid Corporation of China many years!
3, All your question will be kindly feedback in 24 hours all the time!
4, No MQQ limit and all the related certification is available!
5, We promised that more profit and pleasure will be got once business relationship established between us!
6, Welcome to visit our factory and your precious advise is expecting forever!

Contact
Shandong Yangxin Genshen Electric Co., Ltd.
Qingdao Yaoutongxing International Trading Co., Ltd.(subsidiary)
www.sdgenshen.com
www.asia-european.com
Attn: David (sales manager)
 
Ph:  0086-136 5865 3423
   
Add: Zhoushang Development Zone,Yangxin Binzhou city, China.
         Room 2202, Longhaimingzhu Mansion, Laoshan District, Qingdao city China. 



 
Product Certifications / Testing Reports CCC

Product Description

PC -801z Single Phase Eight Meter Box (with main control box)

PC -801z Single Phase Eight Meter Box (with main control box)
The partner of State Grid Corporation
The partner of National Railway Administration of China
ISO9001, TUV, and CE standard 

1.Product Introduce
PC meter box with a new type of environmental protection engineering polycarbonate (PC) manufacturing, with high insulation performance, good transparency, UV resistance, aging resistance, acid rain, salt spray resistance, low temperature resistance, impact resistance and other properties. With good ventilation, rain, heat and other functions. Normal service life of more than 20 years.
The meter box adopts the integrated design idea, a table to sixteen all kinds of electric energy meter and the measuring circuit is assembled in a closed box integration, not only has small occupied space, easy installation and management, but also can stop stealing hit metering device, preventing electricity stealing.
The PC meter box is beautiful in appearance, and the proportion is even, the line is smooth, and it can be conveniently and firmly installed on the concrete wall. Box components compact structure, reasonable layout, clear and smooth lines. The box cover hook, screw and padlock box and interlock. Only the reading function, people do not need to open the tube can directly see the abnormal phenomenon inside, so as to improve the safety of electric exclusion, so as to realize the safe use of electricity, the preventive management objectives.
2. Product Specification
TypeSingle Phase Meter Box (Single Door)
MaterialPC
AC Frequency50HZ or 60HZ
Nominal Voltage220V, 380V, 690V
Electric Current10A-225A
Ambient Temperature-25 -+80ºC, and the average temperature difference is not more than +35ºC;
Clean AirRelative humidity at 40 ºC not exceeding 80%. A higher relative humidity is allowed when the temperature is low;
Less Than 10000 Meters Above Sea Level;
Altitude≤10000m
Ability to Withstand EarthquakesIntensity 8 degrees
NoteThe product is our standardized product.We would provide it with you as the parameter if you have other parameter.
3.Characteristic
 3.1. Box Cover's Material: Polycarbonate (PC) by the engineering plastics, flame retardant PC/ABS engineering plastic.
 3.2. Box's structure: The box consists of a box cover and a box bottom, a box cover and a box bottom with multi-point concealed hook fixed structure can be matched with various accessories, lock, box thickness is 3mm (12.16 bit metering box thickness 3.5mm;
 3.3. Fully Transparent Upper Cover design: the table case is transparent, the window door is integrated with the box cover, which is convenient for the management, supervision, inspection and maintenance of the electric power management department;
 3.4. Large capacity: single body box can meet the requirements of the 16 table installation, can be expanded to 20 meters, to meet the requirements of 10mm2 copper core power line;
 3.5.The upper cover and the base are provided with hinges, which can be opened at 1800, and the upper cover is not needed to be taken out of the box;
 3.6. In and out of the hole: watch box into and out of the hole with waterproof connector;
Shutter design: taking into account the need for heat dissipation, both sides of the metering box with shutter.
3.7. Design: built-in to prevent small animals into the protective net. The top of the table box is sealed to prevent the rainwater from entering.

4.Package
PC -801z Single Phase Eight Meter Box (with main control box)


5.Our Company
PC -801z Single Phase Eight Meter Box (with main control box)

Shandong Province Yangxin Genshen Electric Co., Ltd was founded in 2012 and her subsidiary,Qingdao Yaoutongxing International Trading Co.Ltd, is founded in Qingdao.We are specialized in JP Cabinet, Power Distribution, Electric Energy Metering box, High Voltage Switch Cabinet, Box Type Substation, Transformer, Protection Devices, Low voltage switchgear and other electrical equipment and accessories with ISO9001, TUV, and CE standard in China, which is the partner of State Grid Corporation and National Railway Administration of China.We have always cooperated with China's government.We guarantee the highest quality of our products and services with every order.Taking exceptional care with every request is not only our policy, it's our promise.We will at all times be known as professional and honorable operators who are as good as our word. 
PC -801z Single Phase Eight Meter Box (with main control box)

6.Certificate
PC -801z Single Phase Eight Meter Box (with main control box)

7.RFQ
 7.1.Q: Are you manufacturer?
    A: Yes, we are manufacturer. Our factory is in Binzhou City, Shandong  Province.
 7.2.Q: Can I get guarantee of products?
    A: Yes, every product is 1 year quality warrantee under customer correct using the products.
 7.3.Q: Do you have any Certificate?
    A: Yes. Each of our unit has CCC certificate. All the electric parts with CE certificate, If you need any other Certificate, we can help you to get it.
 7.4.Q: How to buy it? What about the delivery?
    A: Please contact me by email or online, let me know your situation, I will give you professional solution.We have shipping agent can choosing the cheapest and fastest delivery. FOB,CIF, C&F or EXW are no problem for us.
 7.5.Q: How can I pay you?
    A: T/T, L/C is very well used.
 7.6.Q: What about the production?
    A: Produce time is 4~6weeks.
 7.7.Q: Could you offer some spare parts?
    A: Yes, no problem.
 7.8.Q: What about the maintenance?
    A: All the goods past the test, maintenance is very easy.
8.Contact
Should you have any problem,please contact with us,we will reply to you in 24 hour.
Manager:Alvin
Mobile:+86 177 6202 7849